If your cartomizer is empty it will take more than a few drops to fill it. Depending on the size and type It will take drops at the minimum to fill a cartomizer, about 5 drops at a time wating for what you just put in to soak into the carto stuffing completely. If you are starting with a fresh blank or empty carto then you will have to let them sit for a bit after filling to get them primed all the way for Vaping.
There ar emany many youtube vids on different ways to fill, two of the fastest are using the carto condom to force the liquid in from the connector end by filling the condom halfway and pushing the carto down into it. Another is using a blunt tip or plastic flexi tip syringe to fill them i use this method on my larger cartomizers but I still let them sit for at least 15 to 20 minutes before using and fill more than one.
JZXJ , Jun 2, Hangsen RY4 tastes like burnt plastic to me and I tossed a couple of cartomizers before I realized it was the juice. May 22, New York. I'll be watching this thread as I've had similar thoughts recently.
I'm starting to realize that the filler really needs to stay super soaked. Like if you fill it the first time using the condom fill method, then top it off with a few drops when the flavor starts to fade- after that , I think your next refill should be condom fill again, with about drops in the condom, to make sure its staying moist as opposed to just the top of the filler being wet.
Or use a syringe and squirt into the sides of the filler material. Carto-Miser , Jun 2, Same juice I always use. Green mint, sam mint, and menthol vg I get from cignot. I tried the condom fill, but it seemed easier to just take the tip off and let it drop down the 2 holes on the inside. It just now seems I got this problem after months of great vaping. I typically use 7 drops I used to use more, but I got sick of it dripping out the other end.
Yeah, under the tip is another plastic piece. You can take it out, but I just leave it in. It's two holes on the left side and the right side of the piece. I figured since people stick the mouth piece in the condom to re-fill the cartomizer I must have been filling it too quickly, the reason I went to 7 drops was because I though I was over filling it and 7 seemed to give me a couple of "cigarettes worth" of vaping. I talked to the lady I bought them from. Turns out those two holes were the "air ports" and if you take the plastic piece off the fill port is there, but you have to poke a hole in it.
I took one apart and the only thing I can figure was I was filling from the air ports and the juice was hitting the bottom of the stuffing or the wick and coming back up from the bottom into the suffing.
Other than that I don't see how the heck I've been vaping for these months. I will post pictures when I have time. Sep 13, Toronto, Ont. I use the condom method and also use carto tanks. Maybe it's time you upgraded to Clearos or tanks. I usually use a rolled up piece of paper towel and insert it into the end of the atty and let it set for a few hours to absorb out the old juice. I do this every day or two. I also wipe off the connection points on the atty and battery with a paper towel.
You can also use a q-tip with some alcholhol for this every so often just to keep the contact points good and clean. One suggestion for the morning vape is to drip two drops on the atty before bed and don't vape it.
In the moring the first couple of hits will be quite strong. I direct drip, so can't help much on the carts, but you want to make sure the filler is level with the end of the cart so that makes contact with the bridge in the atty.
I wouldn't pull the filler out unless you're cleaning it just rinse with warm water and dry with a paper towel. Best advice on carts is to try the PTB or Fluval fillers vid links below. The stuff that comes in the cart is just The batteries would only last me about hours at best, so I moved on to a Spade and VP2 pretty fast.
Didn't want to fool with the batteries either. Hi Wannavape sorry that you are having some problems. Brian gave you some really good suggestions. I tried using carts and was having the same problems that you are experiencing.
I gave up within a day and went to a direct drip. I know that isn't convenient when out and about in the world. Place filler in cart and make sure it reaches the bottom to soak up the juice. You may want to turn it upside down for a minute to allow the filler to absorb the juice. Make sure the filler is flush with the end of the cart.
Some will suggest letting the filler hand out just a little beyond the cart. I also suggest keeping the led pointed downward when not using, this will keep the liquid moving towards the atomizer.
With concern about going out and about and the batteries. You can get a PCC, small portable charger no bigger than a box of analogs. I also suggest the mega battery for the It is a bit longer than the regular battery, but it will last longer. These are good options if you are not ready for one of the mods that Brian listed. As for cleaning the atomizers, I do the same thing that Brian stated above.
This is very important - after cleaning the excess liquid out of the atty make sure to add a couple drops to it before use. The atomizer will be pretty dry. Trust me on this I lost one this way. Watch the videos that Brian posted. They will give you some good tips and hints.
Good luck, it will all get better. Brian covered most of it - lets see if i can help with the carts part. Mind you this is what i do, so right wrong or indifferent it works for me but maybe not for everyone. That may mean, using the paper clip again, sliding the filler part ways out and adding drops.
Then i make sure the filler is even with the cart so that it will make contact with the bridge. There's no mess but maybe on my finger tips which i can clean off with the towel right there. This whole process takes me about 4mins tops. I do not disassemble any thing over night unless i'm charging them.
It goes with you everywhere, is no bigger or cumbersome than a pack of smokes, and charges on the go. Each Cartomizer Heating Element can last for one - two full days. Once the cartomizer flavor has changed and the vapor amount is low, its time to refill your cartomizer.
To refill the cartomizer remove the white top and drip drops of e-liquid while turning the cartomizer. Warning: The sale of Tobacco products or electronic smoking devices to persons under 21 is prohibited. Nicotine is an addictive substance. This product has not been approved by the U. FDA as a cessation device and therefore should not be used to quit smoking. This product is not intended to diagnose, treat, cure or mitigate any disease or medical condition.
Do not use this product if you are under the legal age of smoking or if you are sensitive to nicotine or inhalants. Do not use this product if you have or if you are at risk of having any respiratory conditions, heart disease, high blood pressure or diabetes.
0コメント